Pex Radiant Heat Aluminum Plates

Pex Radiant Heat Aluminum Plates

Nothing comes even close to the comfort of a radiant heat system. Radiant heating systems are just about hypoallergenic. On the whole, they are more efficient than baseboard heating and forced-air heating.Without blowers, there are no noisy fans, and the home is peaceful.This underfloor heating system eliminates inconvenient floor and wall registers.These systems are easy to zone and offer room-to-room temperature control with multiple thermostats.

SHARE

Product Description

Pex Radiant Heat Aluminum Plates Video

HWALU Pex Radiant Heat Aluminum Plates

Pex Radiant Heat Aluminum Plates offer a number of advantages:

They allow for a more even heat distribution across the flooring surface if compared to staple-up tubing installation.
They serve as a support for PEX tubing and eliminate the need for additional installation accessories.
They allow for a lower fluid supply temperature, thus increasing the radiant heating system’s efficiency and reducing the costs of heating.

Stamped Heat Transfer Plates are a thinner, and are commonly used in sandwich-type radiant floors, where PEX tubing is placed between the finished floor (i.e. laminate, hardwood, etc.) and the subfloor. These plates are wide and short, which makes them ideal for such projects and allows for more versatility in installation.

The following image illustrates the heat transfer process during joist space installation using heat transfer plates. The image speaks for itself and gives very good reasons to consider using the heat transfer plates wherever it is possible.

Staple up with heat transfer plates. These system will run at a lower temperature than to the addition of aluminum fins which extend the contact surface area.

FEATURES

  • Omega shaped 1/2": allows you to snap in 5/8" PEX pipe during installation. This channel shape offers more contact with tubing than U-shaped plates and has a better heat transfer.
  • 0.016 Thick Aluminum 4.5" wide
  • Increase Radiant Floor Heating System's efficiency and response time.
  • Material: Aluminum
  • High Quality Aluminum Heat Transfer Plates for 1/2" PEX Tubing
  • High Quality Aluminum Plates for Fast Heat Transfer
  • Allow 1-2 inch spacing between plates for expansion

Comparison of Floors With and Without HWALU Aluminum Heat Transfer Plates

Testimonial from a Customer:

“1bought a Flir C2 infrared camera and shot some pics of my cottage's radiant floor.I did the hardwood floor with no aluminum heat plates and the bath floor with Radiant Engineering's heat transfer plates that go on the top of the plywood. As you can see in the infrared picture,there is a substantial difference in the heat transfer to the floor surface."

APPLICATIONS

Under the Sub-floor installation - Between Floor Joist - Engineered Floor Boards - Between plywood installation (Sandwich Installation)

Single Groove - Heat Transfer PlatesDouble Groove - Heat Transfer Plates
Material : 26 gauge stamped aluminum sheet
Dimensions : 5” x 24” (127mm x 609.6mm)
Pipe sizes : 3/8”, 1/2” & 5/8”
Material : 26 gauge stamped aluminum sheet
Dimensions : 13” x 24” (330.2mm x 609.6mm)
Pipe sizes : 3/8”, 1/2” & 5/8”
Comfort:

Nothing comes even close to the comfort of a radiant heat system. The technology works much the same as how the sun heats your body. Heat is dispensed evenly from the floor, but does not rise because we are heating the objects in a given space, not the air. It’s a natural feel and you can enjoy a warm chair and warm floors while walking barefoot in the wintertime.

Clean:

Radiant heating systems are just about hypoallergenic. Since the air is not forced, you don’t have to be concerned about the heating system distributing pollen, dust and other allergens in the home.

Energy Efficient:

On the whole, they are more efficient than baseboard heating and forced-air heating. With forced air-heating, up to 30 percent of the heat is lost due to ductwork alone. Again, hot air rises. Therfore, when heating a builing envelope with hot air, the space must be filled with hot air from the ceiling down until it reaches your actual living space. With radiant heat, the taller the ceilings, the better efficiency gains in comparison.

Whisper Quiet:

Without blowers, there are no noisy fans, and the home is peaceful.

Attractive:

This underfloor heating system eliminates inconvenient floor and wall registers.

Zoning:

These systems are easy to zone and offer room-to-room temperature control with multiple thermostats.

Versatility:

Radiant systems can use a wide variety of fuel sources to heat the liquid, including solar water heaters, geothermal heat pumps, high efficiency gas boilers, wood gasification boilers or oil boilers.

The following flooring types may be installed above this type of system:

  • Nail-down solid hardwood
  • Floating hardwood
  • Engineered hardwood
  • Glue-down wood flooring
  • Carpet (broadloom or tiles)
  • Vinyl (sheet or tiles)
  • Ceramic tile

CASE

COPYRIGHT © 2000-2016 HWALU

  • OFFICE: OFFICE: No.52, Dongming RD, Zhengzhou City, Henan Province, P.R.CHINA.
  • MAIL: sales@hwalu.com
  • TEL: +8637166302886
  • FAX: